Hot Air BGA Rework Station With Hakko Heater , 1270W Solder Stations Feature

1. Using microcomputer processor PID programmable temperature control technology Preheating station is to use a glaze layer having a high thermal effect , good thermal shock resistance of the ceramic as the substrate , high-quality nickel branded alloy wire once sintering. It has a high thermal effect , overall good , good thermal stability , uniform heating , high dielectric strength , clean , easy to install and so on features . 

2. Air Gun heater use ceramic heater , heating elements firmly wrapped around the model ceramic , rapid and uniform heating. Use the upgraded version fan , the airflow larger than the ordinary fan , spiral out of the wind, long life.

3. Soldering iron part using Hakko heater , heating up rapidly , temperature stability , long service life ; antistatic design to prevent electrostatic damage to delicate SMD components.

4. The machine has a self-test function , full intelligent over-temperature , short-circuit , open circuit , overload and fault display and protection functions.

5. 853AAA preheating station using the user-friendly design , the cover affixed with a high-temperature , insulated protection pads to prevent scalding operation. The stent uses magnetic induction technology , card board bracket to prevent protective pads suck hood above , can rotate 360 degrees , flexible card board , it is suitable for the circuit boards of different shapes and sizes.

6. 853AAA temperature correction function to adapt to the environmental impact , or replace the heating elements, soldering iron tips etc. spare parts caused by temperature deviation , can use this function calibration temperature. The correction temperature range is -50 °C ~ +50 °C.

7. 853AAA has Celsius / Fahrenheit temperature display function meet different market needs to design the temperature display mode, you can choose under customary interest.

 Hot Air BGA Rework Station With Hakko Heater , 1270W Solder Stations General Usage

1). Suitable for de-soldering and soldering BGA , SOIC , CHIP , QFP , PLCC package SMD IC ,

 Particularly suitable for de-soldering BGA module , computer motherboard north and south bridge , all kinds of mobile phone motherboard SMT IC and LED lights.

2). Shrinking , Paint drying , adhesive removal , thawing , warming , Plastic welding etc.

Hot Air BGA Rework Station With Hakko Heater , 1270W Solder Stations Data

Voltage AC220C±5%

Max power consumption 1270W 

Preheating station parts

Temperature Range 50~ 300  °c or 50~400  °c / 152~572 °F or 152~752 °F

Temperature Stability ±2  °c

Display Type LED

Area 120*120mm

Hot Air Reworks parts

Airflow type brushless fan spiral out wind

Air Flow ≤130L / min

Temperature Range 100  °c -480  °c / 212°F ~896 °F

Temperature Stability 100  °c -480  °c / 212 °F ~896 °F

Display Type LED

Handle cable length ≥100cm 

Soldering Iron parts

Temperature Range 200 °c -480 °c  / 392°F~896 °F

Soldering iron heater Hakko heater

Solder iron holder blue Ferro-alloy iron holder 

Soldering iron handle Blue iron handle

Temperature Stability ±1°c

Tip of ground voltage <2mV

Tip ground impedance <2 ohm

Display Type LED

Handle cable length ≥100cm

QTY 4PCS / Outer carton

Inner box size 37*35*18cm

Outer carton box size 73*40*39cm

Goods weight 5.54kg / pcs

Hot Air BGA Rework Station With Hakko Heater , 1270W Solder Stations Picture

These are 220V units you may need a transformer to use the machine in your country. we also do accept special orders for 110V  / 230V / 240V units 

Our Warranty

* Credit Safeguard

GuangZhou YiHua Electronic Equipments Co,. Ltd  wa